Product
Data Sheet
Ceiling
Suspended
List price $6.786
2
CONTENTS
CONTENTS
Key Features 3
Site Requirements 4
Louver Specications 4
Technical requirements 4
What’s Inside 5
Performance 9
Airow 10
General 10
Heat pump only 13
Notes 14
Ten Year Limited Warranty 15
What This on-site Warranty Covers 15
Limited Ten-Year Warranty On Compressor 15
Optional Extended Five, Ten and Fifteen Year
Comprehensive Warranty 16
Exclusions and Limitations 16
115V Heat Pump Only 17
115V Heat Pump + Elec Heat 18
230V Heat Pump Only 19
230 Heat Pump + Elec Heat 20
-
Ephoca is the US subsidiary of Innova SRL - Via 1° Maggio, 8 – 38089 Storo (TN) Italy.
AIO Ceiling Suspended can be discreetly installed above a ceiling and is ideal for single or multi-room applications. The return can be
© 2025 Ephoca. All rights reserved.
3
KEY FEATURES
• No outdoor unit
The single package design means no outdoor unit, freeing
up space on rooftops and at ground level and enabling in-
• Twin rotary BLDC inverter compressor
• High-eciency ECM fans with auto ESP
-
the need. Automatically adjusted external static pressure
• Cold climate heat pump
-5F.
• Optional 1,800 Watt electric heat
The optional electric heating system operates alongside
-
options for electric heat usage: it can be set to use no
• Intelligent defrosting
AIO’s intelligent defrosting system means more time heat-
ing and less time on reverse cycle defrost
• Quiet
• No outside noise inltration
-
ble units. This means less outside noise intruding into the
room day and night.
• Versatile on/o options
• Corrosion protection
many years of trouble-free performance.
• Minimal clearances and compact footprint
little as 3/4 inch clearance on all sides. Compact footprints
take up minimum space.
• Leak protection
• Easy to service
AIO can be easily maintained and repaired from the front
• Versatile controls
AIO includes an onboard touch controller and an option-
-
gram and third-party controllers from any company using
systems
• 10-Year limited warranty
peace of mind. Comprehensive onsite one-year parts and
Available extended on-site comprehensive parts and labor
KEY FEATURES
4
TECHNICAL REQUIREMENTS
TECHNICAL REQUIREMENTS
•
the current edition of NEC (ANSI/NFPA 70) and local codes
electric codes.
• Voltage rating of 60 Hz, 115V or 208V/230V single phase.
•
minimum of 30% slope if an external drain. An internal
drain is highly recommended.
• -
ing:
• Must be properly insulated
• Minimum of 30% slope
•
condensate line to inhibit freezing. This can be connect-
•
•
•
• The unit must be perfectly level on the vertical and hori-
zontal axis.
• Interior clearances are only required to prevent vibrations.
-
ers clearances are only dependent on ducting.
• -
• -
ing material.
•
•
access the entire bottom of the unit for servicing.
Kinds of custom and creative solutions. The possibilities are
endless, from perforated panels to custom louvers.
• Free area: This area on a louver/grille is open for the air
solution must have at least the amount of free area as
the unit so that ample air can enter and exit the condens-
area can be utilized by enlarging the louver and plenum
until the required free area is achieved.
The minimum free area required is .34 sq feet for
the intake vent and .34 sq feet for the exhaust vent.
• Pressure drop: Pressure drop is the resistance the lou-
create heat build-up inside the condenser portion, causing
by enlarging the louver and plenum until the pressure
The maximum total pressure for the intake and
exhaust ducting (if any) and intake and exhaust
louvers combined must be under 0.45 WC.
To be clear, the entire assembly of ductwork, ple-
nums, and louvers for the complete air circuit, in
and out of the system may not exceed 0.45 WC.
Any louver or louver assembly must meet these require-
ments, as exceeding these limits can cause the unit to over-
-
ed units:
• Sunvent: LLA/C, LLA/M, LLA/S - available through your
Ephoca distributor.
• Thermaduct: RLA8- available through your Ephoca distrib-
utor.
Site Requirements
Louver Specications
5
1. Condenser air intake
2. High eciency outdoor coil
3. Twin rotary inverter compressor
4. ECM Centrifugal supply fan
5. Electrical Controls
6. Supply air grille
7. Resistant Heat strip
1
2
3
4
5
6
98
7
8
10
13
11
WHAT’S INSIDE
12
8. High-eciency indoor coil
9. Bottom return
10. Touch controller
11. Condensate exhaust
12. ECM condenser fan
13. Condensate drain
6
-
• Supply air
• Stale air exhaust
The room air and exhaust air are returned to the unit
through the integrated return air grille on the bottom of
the unit.
• Outside air intake
intake and exhaust).
• Outside air exhaust
and exhaust).
1
2
3
4
AIRFLOW
1. Outside air
2. Supply air
3. Return air
4. Exhaust air
7
INSTALLATION
INSTALLATION
8
MOUNTING TEMPLATE
MOUNTING TEMPLATE
front
side
back
side
minimum space insulation when unit is against wall
0.7”
29.2”
4.3”
16.54”
4.4”
0.7”
0.94” 39.56” 0.94”
0.3” holes for ceiling anchors
cable
passage
upside
below
ceiling tolerance
Mounting Templates
for wall holes
O
0.94”
O
6.37”
O
6.37”
O 0.94”
O
0.94”
8.89” 16.73” 15.82”
5.11”5.11”
0.19”
10.21”
0.59”
Front Side
42.1"
7.6"
0.94"
17.0"
7.7"
0.7" 0.7"
32.4"
0.94"
Back Side
0.3" Holes for Ceiling Anchors
Minimum Space Insulation When Unit is Against Wall
Mounting Templates for wall holes
Intake Air
Ceiling Tolerance
Upside
Cable
Passage
0.94"
Exhaust Air
10.21"
7.5" 4.9"
8.2" 18.1"
16.7"
0.94"
Condensation
Drain
Below
12.4"
0.59"
0.94"
6.37"
9
TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS
1
2
3
Heat Pump
Maximum
Btu/h
15,000 13,000 12,000
Nominal 7,700 7,300 6,600
Minimum 3,400 3,400 3,400
Input Power W 705 814 906
Eciency 13.84 SEER2 9.01 EER2 7.28 EER2
Moisture Removal Pts/h 1.9 - -
Heating
4
5
6
7
8
Maximum
Btu/h
14,000 10,000 7,400 7,100 6,700
Nominal 8,600 8,300 6,200 5,900 5,600
Minimum 4,200 3,200 2,700 2,700 2,700
Input W 695 1,108 1,088 1,049 1,012
Eciency
9.12
HSPF2
2.19
COP2
1.67
COP2
1.64
COP2
1.62
COP2
4 Indoor: 70°F, W.B. 67°F; Outdoor: 47°F, W.B. 43°F
5 Indoor: 70°F, W.B. 60°F; Outdoor: 17°F, W.B. 13°F
6 Indoor: 70°F, W.B. 60°F; Outdoor: 5°F, W.B. 3°F
7 Indoor: 70°F, W.B. 60°F; Outdoor: 0°F
8 Indoor: 70°F, W.B. 60°F; Outdoor: -5°F
1 Indoor: 80°F, W.B. 67°F; Outdoor: 95°F, W.B. 75°F
2 Indoor: 80°F, W.B. 67°F; Outdoor: 105°F, W.B. 75°F
3 Indoor: 80°F, W.B. 67°F; Outdoor: 115°F, W.B. 75°F
10
TECHNICAL SPECIFICATIONS
Indoor
dB(A) 27-43
STC 40
OITC 35
Outdoor dB(A) 28-55
Physical data
Dimensions Net 43.1" W x 33.2" D x 12.3" H
Weight
Net 170 lb
Gross 190 lb
Cabinet
Finish RAL 9003 signal white
Material Steel
Indoor
Type
ECM centrifugal
CFM
125 - 350
Available ESP
N/A
Supply connection
Integrated front
Return connection
Integrated bottom
Speeds
Low, med, high, boost, auto
Filter
MERV 3
Outdoor
Type
ECM centrifugal
CFM
135 - 383
Available ESP
0.45” WC
Intake connection
6" round
Exhaust connection
Speeds
Low, med, high, auto
General
Type BLDC twin rotary inverter
Refrigerant
Type R32
Oz. 23.97
Oil Type Fv50s
Basic functionality Dependent on controller
WiFi Optional module available
Dry contact Yes
Power outage restart Auto-on based on last setting
Operation
Cool+ fresh air, cool only, heat+ fresh air, heat
only, auto
Restricted modes Heat only, cool only, temperature limiting
Timers Dependent on controller
Pipe Size 3/4" Outside diameter
Material Rubber
11
TECHNICAL SPECIFICATIONS
Compressor
RLA
A
9.5 4.7
LRA 9.5 4.7
Indoor ECM fan motor
W (max)
A
180 180
F.L.A. 1.6 0.8
HP 0.24 0.24
Outdoor ECM fan motor
W (max)
A
190 190
F.L.A. 1.7 0.8
HP 0.25 0.25
General
Volt range 103-127 180-253
Hz/ phase 60 Hz singe phase
Power supply Hardwire or LCDI
Power factor (%) 0.96
Input power (standby)
10.8 10.8
Input power (o mode) 1.5 1.5
Cooling (nominal)
A
5.8 2.9
Cooling (max) 15.7 7.8
Heat Pump Only
Heating - heat pump only (nom.)
A
6.1 3.1
Heating - heat pump only (max) 16.5 8.3
Heating - heat pump +900 W
Elec Heat (nom.)
A
13.9 7.0
Heating - heat pump +900 W
Elec Heat (max)
24.3 12.2
Heat
Heating - heat pump only (nom.)
A
- 10.6
Heating - heat pump only (max) - 16.1
Heat Pump Only
MCA
A
20 10
Recommended
breaker size
20 15
MOCP 35 20
Heat Pump + 900
W Elec Heat
MCA
A
30 15
Recommended
breaker size
30 20
MOCP 40 25
Heat Pump +
1,800 W Elec
Heat
MCA
A
N/A 20
Recommended
breaker size
N/A 25
MOCP N/A 30
*LDCI cord not available in 115V above 20A
Heat Pump Only
Amps 20 15
Plug Type 5-20P 6-15P
Heat Pump + 900 W Elec
Heat
Amps
N/A*
15
Plug Type 6-15P
Heat Pump + 1,800 W Elec
Heat
Amps
20
Plug Type 6-20P
Electrical
12
DISPLAY
36 7/16" [926]
10 1/2" [266]
43 1/16" [1093]
37 3/16" [944]
3 5/8" [93]
18 1/16" [459]
16 3/4" [425]
8 1/4" [209]
21 1/2" [547] 21 1/2" [547]
4 7/8" [124]
7 1/2" [190]
41 3/16" [1046]15/16" [24]
15/16" [24]
7 11/16" [196]
17 1/16" [433]
7 5/8" [193]
13/16" [20]
POWER SUPPLY
(OPTIONAL LOCATION)
Ø6" [Ø160] DUCT
Ø6" [Ø160] DUCT
CONDENSATE DRAIN 3/4"
[Ø18 ]
HOLE FOR
ANCHORS
HOLE FOR
ANCHORS
HOLE FOR
ANCHORS
HOLE FOR
ANCHORS
12 5/16" [314]
33 3/16" [843]
POWER SUPPLY
(OPTIONAL LOCATION)
FRONT
REAR
LEFT
RIGHT
BOTTOM
TOP
DIMENSIONS
13
Heat pump only
WIRING DIAGRAM
14
Notes
Digital inputs:
CN13 Door Presence contact for terminals CP (presence contact)
CN14 Drain pump start level
CN15 Drain alarm
ZE Internal air quality sensor (placed on inlet air)
HU Internal air Humidity and temperature Probes (placed on inlet air)
CN17 OT External temperature probe (placed on external air inlet) NTC 5.28kΩ a 25~C.
CN17 OPT Condenser probe (placed on pipe of external coil). NTC 5.28kΩ a 25~C.
CN7 IPT Evaporator probe (placed on pipe internal coils). NTC 5.28kΩ a 25~C.
CN16 GT Exhaust air probe (placed in exhaust air ). NTC 5.28kΩ a 25~C.
XP209 Compressor discharge temperature probe. NTC 58kΩ a 25~C.
CN2
Valve
Reversing valve summer/winter
CN1
Heater
External heater (230VAC/5A)
CN4
Pump
Drain pump
Outputs
CN23 In fan
Driving signal 0-10V external fan
CN9 Out fan con
Driving signal 0-10V external fan
CN19 Step Motor
Driving step motor for damper
CN10 Step Motor
Driving step motor for damper
CN11 Display
Display touch connection
DESCRIPTION
15
WARRANTY TERMS AND CONDITIONS
purchased and installed in its original installation location.
• Purchased from an Ephoca authorized distributor.
•
•
•
printed instructions in the user guide and in compliance
good trade practices.
• The site must have a minimum of ten (10) units and there
must be spare units on site equal to a minimum of three
service issue until an Ephoca technician can be on site.
• -
vider must be in place to ensure the units are maintained
annual unit cleaning.
•
dealer is responsible for all labor costs and responsible for
having attic stock for replacements.
• Every job must be inspected before turning on the units,
and pictures of at least 10% of the units must be sent
process guide.
Ten Year Limited Warranty
What This On-site Warranty Covers
-
periods:
Full One-Year Warranty
-
on-site, free of charge, all labor and related service costs to
a replacement unit at our cost and arrange to pick up the
defective unit at our cost.
Limited Ten-Year Warranty On Compressor
-
-
be responsible for all labor costs and related service costs.
Optional Extended Five, Ten and Fifteen Year Comprehensive Warranty
onsite, free of charge, all labor and related service costs to
you a replacement unit at our cost and arrange to pick up
16
• Any AIO purchased from a non-authorized or out-of-state
dealer.
•
•
Ephoca technician prior to use.
•
repairs performed by unauthorized personnel.
• Installation of AIO, setup of user controls or adjustments
to user controls.
• Instruction on user operation.
•
• -
ing connections.
•
containing any damaging chemical such as chlorine or
-
tial environment).
•
• Removing AIO from inaccessible locations.
• Correcting improper installations.
• Any AIO not installed pursuant to applicable regional
or other local rules and ordinances.
•
due to incorrect inadequate electrical service or failure of
•
•
by failure or malfunction of AIO as a result of any cause
including natural disasters, accidents, misuse, improper
• Any cost of supplemental (replacement) Cooling or heat
during equipment failure.
• -
ing the cost of refrigerant.
• Any unit if a documented maintenance plan is not in place
prior to installation.
•
•
• Submit documented annual unit cleaning.
•
units.
•
•
•
•
• Customer’s account balance must be paid.
met:
•
•
• -
mains unpaid.
-
-
-
-
FOR A PARTICULAR USE OR PURPOSE.
-
-
-
cover any additional responsibilities or obligations not ex-
pressly stated herein nor does it apply to any accessory that
is not a part of the AIO as included in the package by Ephoca.
Exclusions and Limitations
17
Job Reference Construction
Location Approval Quote Number
Engineer
Submitted To P.O. Number:
General Features
1. EER2 and SEER2 are based on nominal capacity of 7,800 Btu/H
2. COP/ HSPF2 are based on nominal capacity of 8,300 Btu/h. COP/HSPF2 only
take intro consideration the heat pump and not electric heat
•
• ECM fans
• R32 Refrigerant
• Auto restart
• Intelligent defrost
• No outdoor unit
• Onboard touch controller
•
• Compact slim design
• 3 selectable fan speeds + Auto
•
includes 1 year parts and labor
and Additional 9 years on parts
• Made in Italy
Performance Specications
Cooling Capacity (Btu/h) 14,000
SEER2 13.35
EER2 10.18
Rev. Cycle Max Heating Capacity (Btu/h) 14,000
HSPF2
8.56
Circulation (CFM)
226-400
Dehumidication (Pts/h)
1.9
Wall Controllers + Gateways
□ Wireless Remote WRCH20
□ Basic Touch Controller LTCH20
□ Recessed Touch Controller RTCH20
□ Advanced TFT Controller with 7-Day program TFTH20
□ Wireless (AA Battery) Infrared Controller with
7-Day program
WIPT20
□ Third Party Gateway TPG015
□ Modbus MODH20
□ WiFi App WIFI30
□ E-Paper EOS Controller EEOS12
□ Simple EOS Controller SEOS12
□ BACnet BACH20
Electric Specications
Electric Heat
Power Supply (V Ph, Hz)
115/1/60
Voltage Range
98-120
Running Amps Cooling
15.7
Running Amps Heating
16.5
MCA
20
Maximum Overcurrent Protection (A)
35
Recommended breaker size
20
Max Power Input (watts) Cooling
1,800
Max Power Input (watts) Heating
1,800
LCDI Power Cords
Electric Heat Whip Plug SKU
□ None 72 in. NEMA 6-15P L115v15a
"12.3
33.2"
43.1"
18
Wall Controllers + Gateways
□ Wireless Remote WRCH20
□ Basic Touch Controller LTCH20
□ Recessed Touch Controller RTCH20
□ Advanced TFT Controller with 7-Day program TFTH20
□ Wireless (AA Battery) Infrared Controller with
7-Day program
WIPT20
□ Third Party Gateway TPG015
□ Modbus MODH20
□ WiFi App WIFI30
□ E-Paper EOS Controller EEOS12
□ Simple EOS Controller SEOS12
□ BACnet BACH20
Job Reference Construction
Location Approval Quote Number
Engineer
Submitted To P.O. Number:
General Features
1. EER2 and SEER2 are based on nominal capacity of 7,400 Btu/H
2. COP/ HSPF2 are based on nominal capacity of 8,200 Btu/h. COP/HSPF2 only
take intro consideration the heat pump and not electric heat
•
• ECM fans
• R32 Refrigerant
•
• Auto restart
• Intelligent defrost
• No outdoor unit
• Onboard touch controller
•
• Electronically controlled air
louver
• Compact slim design
• 3 selectable fan speeds + Auto
•
includes 1 year parts and labor
and Additional 9 years on parts
• Made in Italy
Performance Specications
Cooling Capacity (Btu/h) 14,000
SEER2 12.89
EER2 10.2
Rev. Cycle Max Heating Capacity (Btu/h) 14,000
Electric heat (BTU/h) 3,070
Total Heat Capacity w/ Elec (Btu/h)
17,070
HSPF2
8.64
Circulation (CFM)
226-400
Dehumidication (Pts/h)
1.9
Electric Specications
Electric Heat
Power Supply (V Ph, Hz)
115/1/60
Voltage Range
98 - 120
Running Amps Cooling
15.7
Running Amps Heating
24.3
MCA
30
Maximum Overcurrent Protection (A)
40
Recommended breaker size
30
Max Power Input (watts) Cooling
1,800
Max Power Input (watts) Heating
2,700
"12.3
33.2"
43.1"
19
Electric Specications
Electric Heat
Power Supply (V Ph, Hz)
230/1/60
Voltage Range
207-251
Running Amps Cooling
7.8
Running Amps Heating
8.3
MCA
10
Maximum Overcurrent Protection (A)
20
Recommended breaker size
15
Max Power Input (watts) Cooling
1,800
Max Power Input (watts) Heating
1,800
Job Reference Construction
Location Approval Quote Number
Engineer
Submitted To P.O. Number:
General Features
•
• ECM fans
•
• R32 Refrigerant
• Auto restart
• Intelligent defrost
• No outdoor unit
• Onboard touch controller
•
• Compact slim design
• 3 selectable fan speeds + Auto
•
includes 1 year parts and labor
and Additional 9 years on parts
• Made in Italy
Wall Controllers + Gateways
□ Wireless Remote WRCH20
□ Basic Touch Controller LTCH20
□ Recessed Touch Controller RTCH20
□ Advanced TFT Controller with 7-Day program TFTH20
□ Wireless (AA Battery) Infrared Controller with
7-Day program
WIPT20
□ Third Party Gateway TPG015
□ Modbus MODH20
□ WiFi App WIFI30
□ E-Paper EOS Controller EEOS12
□ Simple EOS Controller SEOS12
□ BACnet BACH20
1. EER2 and SEER2 are based on nominal capacity of 7,800 Btu/H
2. COP/ HSPF2 are based on nominal capacity of 8,300 Btu/h. COP/HSPF2 only
take intro consideration the heat pump and not electric heat
Performance Specications
Cooling Capacity (Btu/h) 14,000
SEER2 13.35
EER2 10.18
Rev. Cycle Max Heating Capacity (Btu/h) 14,000
HSPF2
8.56
Circulation (CFM)
226-400
Dehumidication (Pts/h)
1.9
LCDI Power Cords
Electric Heat Whip Plug SKU
□ None 72 in. NEMA 6-15P L115v15a
"12.3
33.2"
43.1"
20
1. EER2 and SEER2 are based on nominal capacity of 7,400 Btu/H
2. COP/ HSPF2 are based on nominal capacity of 8,200 Btu/h. COP/HSPF2 only
take intro consideration the heat pump and not electric heat
•
• ECM fans
• R32 Refrigerant
•
-
ment
• Auto restart
• Intelligent defrost
• No outdoor unit
• Onboard touch controller
• Optional add-on ERV
•
• Compact slim design
• 3 selectable fan speeds + Auto
•
includes 1 year parts and labor
and Additional 9 years on parts
• Made in Italy
Job Reference Construction
Location Approval Quote Number
Engineer
Submitted To P.O. Number:
General Features
Performance Specications
Electric Heat
Cooling Capacity (Btu/h) 14,000 14,000
SEER2 13.35 13.35
EER2 10.18 10.18
Rev. Cycle Max Heating Capacity (Btu/h) 14,000 14,000
Electric heat (BTU/h) 3,070 6,140
Total Heat Capacity w/ Elec (Btu/h)
17,070 20,140
HSPF2
8.56 8.56
Circulation (CFM)
226-400 226-400
Dehumidication (Pts/h)
1.9 1.9
Wall Controllers + Gateways
□ Wireless Remote WRCH20
□ Basic Touch Controller LTCH20
□ Recessed Touch Controller RTCH20
□ Advanced TFT Controller with 7-Day program TFTH20
□ Wireless (AA Battery) Infrared Controller with
7-Day program
WIPT20
□ Third Party Gateway TPG015
□ Modbus MODH20
□ WiFi App WIFI30
□ E-Paper EOS Controller EEOS12
□ Simple EOS Controller SEOS12
□ BACnet BACH20
Electric Specications
Power Supply (V Ph, Hz)
230/1/60 230/1/60
Voltage Range
207-251 207-251
Running Amps Cooling
7.8 7.8
Running Amps Heating
12.2 16.1
MCA
15 20
Maximum Overcurrent Protection (A)
25 30
Recommended breaker size
20 25
Max Power Input (watts) Cooling
1,800 1,800
Max Power Input (watts) Heating
2,700 3,600
LCDI Power Cords
Electric Heat Whip Plug SKU
□ + 900W 72 in. NEMA 6-15P L220v15a
□ + 1800W 72 in. NEMA 6-20P L220v20a
"12.3
33.2"
43.1"
Realized by Ephova technical dept.
Ephoca is the US subsidiary of Innova SRL - Via 1°
Maggio, 8 – 38089 Storo (TN) Italy
| 216-710-1000
